Loading... Please wait...

Our Newsletter

OP-COM 2010 CAN OBD2 OPEL V1.44 Car Diagnostic Reader Scanner (Black)

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
150.00 LBS
$2.00 (Fixed shipping cost)
Bookmark and Share

Product Description

  • OP-COM - PC based Opel diagnostic
  • VERSION: OPCOM 090714
  • PC based diagnostic program
  • Covers almost all Opel cars, even new cars with CAN-BUS based diagnostics, such as Vectra-C, Astra-H, Zafira-B
  • Lets you to read out and clear fault codes, shows you live data, lets you to perform output tests, and supports remote key programming
  • The program supports many control units such as: Engine, Automatic Transmission, ABS, Airbag, Engine Cooling Module, Instrument Cluster, Electronic Climate Control, Body Control Unit, etc.
    The diagnostic interface works as a multiplexer, and selects the appropriate pin for communication as there are many pins stored in the OBD connector
    PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
  • Fault codes will be shown with all available information:
  • Full fault code text description, Full status information (Present, Not present, Intermittent)
  • Supports printing, saving, or copying the fault codes to any other application
  • From the fault codes window, you can go directly to the measuring blocks window
  • Supports measuring block information on many control modules, which can be chosen by the user
  • Can show 8 measuring block parameters simultaneously
  • The sample rate depends mostly on the communication protocol
  • For example, older systems, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are the fastest
  • Supports running output tests on many controllers
  • PIN3-PIN11
  • PIN1
  • HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
  • MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
  • SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
  • Can provide feedback on the state of the activated output to easily find the failed components
  • Can recognize keys to immobilizer, and remote keys to the central door locking system with the OP-COM
    Can also reset and program the following immobilizer related items: ECM, BCM, IPC
  • You can find the vehicle security code on the CAR-PASS
  • Can also reset and program the service interval reminder on Astra-G, Zafira, Corsa-C, Meriva
  • Can code SAB6, and SAB8 airbags with the included software
  • Diagnostic Interface: USB port
  • Quite affordable compared to the TECH2

Find Similar Products by Category

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!